posted by Johnny O - Benelliforum - (30 Sep 2005)
Forks:
1. The forks springs are miles too soft, wind the preload adjusters all the way down too full hard.
2. Screw the compression adjusters (on the bottom of the forks) all the way in, then back them out 1/4 turn.
3. Rebound adjusters set at full soft, all the way out.
Rear:
1. I found exactly as the manual say's was best for both damping adjusters.
2. spring preload: set it with about 10mm of unladen sag. posted by FiBlues- Benelliforum - (30 Sep 2005)
Thanks, something like this?
Front:
Preload: all closed eg. 15 turns (from open to close)
Rebound: all open
Compression: 1/4 turn (from closed to open)

Rear:
Spring length: ?
Preload: "10 mm of unladen sag" sorry, did not understand
Rebound: 11 click (from closed to open)
Compression: 8 click (from closed to open)